1 / 2
21700 LiIon holder for Promovec Carrier case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
reuse Promovec Carrier case with new 21700 LiIon cells.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (1)Powiązane
Use strong metallic Promovec Carrier nXL casing to build new 10S3P pack from 21700 cells.
Either build 3 blocks of 3x3 cells plus 1 block 1x3 cells with same dimensions as original 18650 pack and keep innards (lock, bms, connector, light) intact.
Or remove original innards and use casing for 12S3p with 4 blocks of 3x3 cells.
Set includes holders for 3x3 and 1x3 blocks, endplates, spacer between blocks, backplate for bms and dies for copper/steel bus.
Print backplate and spacer (trenner) from TPU.