Sink Scrubby Strainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Useful for scrubbies and things that drip water on your counter all the time.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Put scrubbies and things in and they strain right into your sink!
Print one strainer_main, one strainer_top, one base (there are two different bases, one for sinks without lips (strainer_base) and sinks with lips (angled strainer_base)), and as many strainer_panels as you want (though I would recommend only 1-3 so the sections aren't tiny).
Supports are needed, though not a lot.
Print settings don't matter very much, though smaller layer heights can improve the water flow through strainer_base.
After you put the panels in the main body, put the strainer_top on to make it look nice.