Soft air balloon ceiling lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another hot-air-balloon-shaped ceiling lamp, designed from scratch specifically for print beds of at least 250×250 mm
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Another hot-air-balloon-shaped ceiling lamp, designed from scratch specifically for print beds of at least 250×250 mm. I originally planned to use the IKEA Hemma as the lamp holder, but its hook was too long, so I redesigned it. When assembling parts some glue is needed only for the basket, the ropes and the connecting ring. For bulbs e27 max 70mm width. The look isn't new, as the lamp is inspired by Marcel’s model, but I redesigned it from scratch to ensure no parts are too difficult to print or too fragile—except for the top of the balloon, which represents a perfect example of how to waste material :)
Note: my settings works quite well, but for the topmost part of the balloon I strongly suggest to tweak a bit with the support offset, it could come out easier to remove.