Ribber Cylinder Storage and Install / Removal Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ribber cylinder install / removal tool for @pandel's CSM Ribber attachment
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I made pandel's remix of the Ribber for our highly modified version of JeepingJohnny's Circular Sock Machine. I wanted a tool to help with the installation and removal of the ribber cylinders so that if my wife wanted to change out the various sizes should could manage it on her own.
This tool can double as storage for your extra ribber cylinders when not in use. To install the ribber, place the ribber assembly and ribber cylinder in the jig, align your steel shaft with the hole in the ribber and tighten the bolt from the top slowly. To remove the ribber, place the assembly, ensuring that the ribber cylinder is below the lip, and tighten from the bottom, ensuring that the bolt presses on the steel shaft. when removing you may need to put some downward pressure on the parts of the ribber cylinder not in contact with the lip. Tighten slowly and push down frequently on the cylinder.
Parts:
5/16" bolt - recommend 4" minimum
2 5/16 nuts
You can also update the nut sizes for metric in the FreeCAD files if you so choose.
Printing:
I printed PLA with 3 walls, 5 bottom and top layers and 5% gyroid infill. If your not super worried about filament use or print time I would bump up the infill. Supports are required for this design.
Given how specific a design this is, we may be the only ones who use this, but if you find it useful please let me know in the comments or with like. My wife doesn't think anyone else will use it :P