Battery box for three AG13/LR44 cells
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
storage box with magnet mount
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Instead of real DROs I use calipers on my lathe and milling machine . These operate with AG13/LR44 batteries and as I only hacked Chinese models the current consumption even in standby isn't the lowest. For this reason I quite often end up with empty batteries when I want to do some work. So far I took the batteries out and taped them somewhere to the machines but that quite often left some glue residue which prevented good contact.
Simple solution: a tiny battery box. The hole on the bottom is for an optional Ø10x2mm magnet which can be glued in with Epoxy or superglue.
Print Settings
Printer brand:
Anycubic All-metal Mega
Supports: No
Resolution: 0.3mm
Infill: 10% cubic
Filament material: any, I used PLA