Housing for W8BH Morse Tutor esp32
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a housing for the W8BH morse tutor. it is designed to fit the esp32 version where the esp32 board is mounted…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a housing for the W8BH morse tutor. it is designed to fit the esp32 version where the esp32 board is mounted on female headers. When inserting the board, you have to flex the housing away from the switch on the left side of the board as you tuck the components on the rear into their positions. The screen cover uses 2mm socket head cap screws the main cover uses 3mm flat head screws.
I used PETG.
PS if yo find this useful feel free to buy me a cup of joe https://www.buymeacoffee.com/AlphaCharlie4
Category: Electronics