Morse Paddle Key MKII
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small CW Paddle KeyIt is less than 3.5in long overall.It has provisions for 4 flat head screws to attach it…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small CW Paddle Key It is less than 3.5in long overall. It has provisions for 4 flat head screws to attach it to a surface. It is a revision of my previous design: https://www.thingiverse.com/thing:5402839 UPDATE: I added some paddles with bigger pads as an option.
This was printed using PETG I'm sure other stuff would work too.
the center conductor is made from a 12-13mm long piece 1/4 in copper pipe soldered to a ring terminal It requires (2) M2x5 machine screws (3) M3x20 machine screws (2) M3x6 or M3x8 socket head cap screws (2) M3 nuts (2) M3x5 machine screws (3) ring terminals that fit over the M3 screws (1)3.5mm TRS jack* (1)0.8x8x20mm coil spring**
*This uses a 3.5mm TRS jack like the ones here. https://www.amazon.com/gp/product/B07QBNRK38/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 these are what I used however they didn't include the nut so watch out
** This is the spring I used https://www.amazon.com/gp/product/B085NSVV6W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
if yo find this useful feel free to buy me a cup of joe https://www.buymeacoffee.com/AlphaCharlie4
Category: Electronics