ZEP Professional Sprayer Broken Neck Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A repair cover for ZEP Professional Spray bottles with a broken neck. For broken thread see my other model.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This model will (hopefully) re-bond a sprayer with a broken neck (when it breaks right above the cap). For broken thread see the link below.
This model may be snug. The inserts should meet and produce a closed seam. If you have problems let me know.
Updated the cover to re-enforce the cuts 5/2026
Instructions
Print the Left insert, right insert and the cover.
Slide the COVER on first with the slot openings facing down.
Install the inserts with the notch over the yellow ring above the screw cap on the top and over the screw on cover at the bottom.
Installing the second insert do one side first and then roll it over to meet the other side.
Slide the cover over top, aligning the slots.
Once the cover is 50% a good solid push may need to get the tension balls over the edge.
It should require no glue. PETG is more chemical resistant than say PLA.
If you have broken THREAD see this model