Thrustmaster TWCS throttle yaw paddle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thrustmaster TWCS throttle replacement yaw paddle
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
I broke my yaw/rudder pedal on my Thrustmaster throttle, this is a drop in replacement. I printed with 4 walls and 25% infill, print in supplied orientation with supports for best results. You may need to file/sand down some of the internal edges to give enough clearance for full range of motion but the clearances should be pretty good stock. I had much more trouble going left, right was no problem.
I believe this is a little wider than stock and had a little extra flexibility to it when I printed it in PETG, may be better to print this in PLA to give a little extra stiffness.