KitchenAid 5KSMVSA pusher large
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This large pusher acts as a guide for the smaller inner pusher on the KitchenAid fresh prep slicer and shredder
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
After several dropping accidents, the original "pusher" for my Kitchenaid 5KSMVSA Fresh Prep Slicer and Shredder attachment exploded. Like many of these things, finding a replacement part without buying the whole she-bang again is a challenge. So I measured the original and re-created it.
Being for use in food prep, I reccomend using a plastic suitable to being washed and fine enough layers that food wont be left behind. My draft test piece printed in Black PLA fits perfectly and the smaller center pusher travels nicely down this replacement part. The white photos have been printed in transparent ABS and may get a acetone vapour smooting yet.
I reccomended printing in current orientation with supports from build plate, as it seems to save some print time and a reasonable amount of support material (and post print support removal :-) ).
This was created using fusion 360, but is an original creation so feel free to share, modify or offer suggestions for improvement.