Pokemon TCG Deck Case - tight fit for 60 non-sleeved cards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
<u>1.2 Update:</u> fixed corners and length of the top and bottom tabs.Wanted to store my old Pokemon TCG cards in…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
1.2 Update: fixed corners and length of the top and bottom tabs.
Wanted to store my old Pokemon TCG cards in nice boxes instead of being tied by rubber bands. Found this design and remix but they are a bit loose and the coin design doesn't fit the ones I have. Turns out there are too many sizes of coins, but there is only 1 size of cards and illustrations.
The base is a remix from jessed, taller and thinner to fit the cards better. The first lit is a remix of srynearson to the correct size for the illustration and removing the coin. The last lit is fully mine.
Hope you find it useful!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
read notes bellow
Notes:
I printed this boxes with 0% infill, but set Bottom Thickness to 2mm for both lit and 4mm for the base. That way you get a solid foundation and the walls are more flexible since it's a tight fit.
Category: Toy & Game Accessories