Pot lid spacer / Topfdeckel-Abstandshalter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to keep the pot lid open during cooking, creating a gap for steam to escape. FOR: Downdraft cooker hoods
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pot Lid Spacer
Description
You’ve probably encountered situations while cooking where you want steam to escape from the pot without fully removing the lid. Usually, this is done by placing a spoon between the pot and the lid.
For me, this was not sufficient, as I often need a larger gap between the pot and the lid.
That’s why I created this Pot Lid Spacer. It features two different positions, allowing you to choose between different gap sizes. The back plate is designed with a honeycomb pattern to allow steam to pass through easily.
This is primarily applicable for "Downdraft cooker hoods".
Printing
Obviously you want to print this using a filament that is heat resistant!
I recommend PC or PP. My first try nevertheless was PETG and I still use it. There are also some high temperature filaments (HT) on the marked that can work,
Supports: NO