HomeAssistant Voice Preview 2" speaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for HomeAssistant Voice Preview with place for 2"-2,75" 4ohm speaker.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Enclosure for HomeAssistant Voice Preview with place for 2"-2,75" 4ohm speaker.
SpeakerPlate is meant for LG Woofer Speaker EAB65148201
Cylinder113 is for mostly every other 2" speaker
You only need:
4x M3 LockNuts for side inserts of MainBody to screw on the SpeakerPlate (with screws from the HA Voice box)
4x M3 LockNuts for screwing the Speaker to the SpeakerPlate
4x M3 Screws for screwing the Speaker to the SpeakerPlate
When you break the sides which should hold and clamp the switch paddle, you can use Additional holder. you hust put it on the paddle and then put the board in and screw it on.
Reuse original silicone pads in the BottomCone.
Category: DIY