MBOT3D MK2 Remix (Ender7 style fan duct with dual 4010 fans)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update: Ahmad has created a version 2 of his design - please go check it out and donate to him:…
- Ocena
- 4,8 / 5
- Polubienia
- 100
- Pobrania
- 556
- Wydruki
- 8
- Wyświetlenia
- 4998
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Update: Ahmad has created a version 2 of his design - please go check it out and donate to him: https://grabcad.com/library/mbot3d-mk2_rev2-0-ender7-style-fan-duct-1
Important: This is a remix of https://grabcad.com/library/mbot3d-extruder-mk-2-mod-1 by Ahmad Sunardi
I think this is the most beautiful fan duct for the Ender 3 V2 increasing the cooling performance by using two 4010 blower fans. However the original design of the above creator had some issues which I fixed in this remix. Mainly the hole on the front for the heat break cooler - it is simply too small so that the heat break was not cooled sufficiently. Also I added a tab to reduce air leaking onto the part.
The design consists of three parts:
- Frontplate_V3.stl - the main body
- Backplate_V3.stl - used to mount the main body to the carriage
- Airducts_V3.stl - holds the two fans
Alternative for a 4020 Sunon fan:
- Frontplate_Sunon4020.stl - the main body
- Airducts_Sunon4020.stl - the airducts
This air duct has some neat features:
- dual 4010 fans with part cooling from both sides
- the main body is hinged and can be removed with only two screws
- the blower fans sit in a seperate housing
- BL Touch works with the stock metal bracket
I would not recommend to print this in PLA as it sits quite close to the hotend. I used PETG and GreenTec - both work perfectly fine.
Update: I have added a version for a 4020 Sunon fan as the heatsink fan. The respective files are named*_Sunon4020.stl.
Update 2: If you need help assembling the shroud: mattpker has create an assembly video right here: https://www.youtube.com/watch?v=Ayqa3cT2KjY
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.12mm
Infill:
20
Filament: purefil GreenTec Pro Black
Notes:
The main body (Frontplate_V3.stl) and the backplate (Backplate_V3.stl) can be printed without supports but the air ducts (Airducts_V3.stl) need supports from print plate.
Category: 3D Printer Parts