Singer knitting machine: Brake pusher for tension mast
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for a singer/superba knitting machine. This is part of the tension mast.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Replacement part for a Singer/Superba (and therefore proabably white, phildar...) knitting machine. This is part of the tension mast -- if the end caps ever fall off, this part is very easy to lose.
It's the cheddar yellow part in the photos.
The part makes sure that the yarn doesn't continue feeding from the cone due to the tension on the spring when the carriage is stopped, but instead it adds tension from a second spring that holds the yarn in place between the two metal discs.
This was printed standing up with a support for the side beam.
Seems to work well enough: It's been installed in the machine for a couple of months now and by now I've completely forgotten about it.