Ardusimple SimpleRTK3B Pro Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the simpleRTK3B Pro, Long Range radio module, Shield for second xbee socket, and the bluetooth module.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
A basic case for the simpleRTK3B Pro, Long Range radio module, Shield for second xbee socket, and the bluetooth module. There are only holes for the main GPS lead, long range antenna, and the POWER+GPS USB connection.
The main board mounts with two screws.
The lid is a little tight on this version but that should hold it in place by itself.
I printed this in PLA, but if heat is an issue I may switch to PETG.
May 2026: Added Lid V2. We were having issues with the long range radio module moving with the weight of the antenna on it. Lid V2 adds a piece to hold the radio in place on the board. I've included the .STEP file if for some reason yours doesn't fit the same as mine do.