Puffy wax stamps/seals
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A variety of low-filament, quick-printing stamps you can use with wax/hot glue to make seals for letters, etc.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Make sure to print with ironing on!
These stamps are designed for sealing wax. This type of wax is often a little sticky/gluey and flexible - not the brittle type of traditional wax used in letter seals.
Simply print one of these stamps, melt your wax, let it cool for a second (keeps the wax from sticking, in my experience), and place the stamp on top of the wax. No need to press it down - doing so may cause too much of the wax to squish into the stamp. Make sure the seal is cool, then peel off the stamp to reveal your seal!
I've modeled these stamps to create a 25mm design. You can adjust the scale to your preference. I've found that regular PLA works well - the silk PLA I tried seems to deteriorate over time from the heat of the wax. PETG may work better for the designs that have small, breakable details, like the strawberry.
Happy stamping!
Tutorial: https://youtube.com/shorts/XqboOjq6RfA