Airgun Ice Target
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are some printable airgun targets to get back at winter!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Here are some shoot-through ice molds intended for use as airgun targets. Three mounting options are available: stand base, wire hook, or nail hanger.
The circular target is ~1.5in/38mm and intended for 35-50yd range.
If you make a clean shot, the target mold is reusable.
I tried to design these to be quick to print and allow for making as many as your bed will hold. If you use the upright/stand base, you'll probably want to glue the base onto a surface to prevent the target from toppling over.
To prepare, apply a square of 2" painter's tape to the flanged side of the target, place on a flat surface, fill with water and freeze. My initial results have been good (as no water has seeped out and tape has been removable from the frozen target).