1 / 2
roller to apply solder mask to circuit boards — zdjęcie 1
1 / 2

roller to apply solder mask to circuit boards

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A print in place roller for applying solder mask to a circuit board, or whatever else you can find a use for it.

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
39
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Public Domain

Pretty self explanatory, it's a roller.  You will need a 8mm allen wrench to loosen the print, or a screwdriver probably and I found jiffy lube helps a lot as well, you can inject the lube into the seam using that little straw thing. Crazy glue the handle bits together it you like, included for completeness, the insert is more about avoiding left right movement when gluing, it's corner edge facing out.

If you want a smoother roller, slow you print down. If it's a throwaway, then go for it.

You can try adding fuzzy skin to the plain version, that works as well. Just put a cylinder modifier with no fuzzy skin inside.

Edit: Added a handle with a scraper on the bottom. 

Tagi