50% filament and print time benchy+full calibration test print!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model includes 2 torture tests, the classic benchy partnered with the all-in one calibration test except, 50% fila.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 364
- Wydruki
- 0
- Wyświetlenia
- 1031
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
The Ultra-Efficient Calibration Combo (Benchy + Stress Test)
Why waste hours and grams of filament on separate calibration runs? This remix combines the legendary 3DBenchy with a comprehensive stress test, scaled and optimized to give you all the data you need in half the time.
By merging these two tools and reducing the overall footprint, I’ve created a "one-and-done" file that verifies your printer’s performance without the unnecessary bulk.
What this model tests:
Dimensional Accuracy: Integrated calibration blocks and the Benchy hull.
Bridging & Overhangs: Multiple angles and spans to find your cooling limits.
Retraction: Fine pillars to dial in those pesky stringing settings.
Bed Leveling & Adhesion: A wide, thin base footprint to ensure your first layer is perfect across the plate.
Tolerances: Small gaps to check if your parts will fit together.
Key Improvements:
50% Faster: Optimized geometry to get you back to printing your real projects sooner.
Filament Saver: Scaled to use significantly less plastic than running a full-sized Benchy and a separate test suite.
All-in-One: No need to swap files; just hit print and watch your printer tackle every common challenge at once.
Print Recommendations:
Layer Height: 0.2mm (standard) or 0.1mm for high-detail testing. (doesn't really matter, recommend 0.2 though for accurate results.)
Infill: 10-15% (Grid or Gyroid recommended). (doesn't really matter)
Supports: None! (The whole point is to see how your printer handles the tricky parts).
Material: Works great with PLA, PETG, or ABS to find material-specific sweet spots. (Really any though, for most acurate results use what you use most often, PLA for most people.)