TaRDiS mega coin stash
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An oversized TaRDiS "piggy bank".
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I've created this remix as a birthday gift for Brian, a dear friend of mine and a huge fan of the tv series Dr. Who. It's an enormous "piggy bank" with inner volume of 2,8 liters (0,74 US gallons), which can be a challenge to fill with coins (and also to lift, once is full). The "coin hole" on the top is 30x4 mm, so all EUR coins can fit. I'm not sure for other coins, but I'm confident that there aren't many coins larger than 30 mm in diameter and thicker than 4 mm.
I've made it printable on average hobby printers and printed it in basic blue PLA on my Ender 3 V3 SE. I also separated the "POLICE BOX" sign frames from the main body to avoid the use of supports. The signs and the writing on the door are printed on paper and glued into place. There are 2 versions of the main body, one blank and one with full TaRDiS name in Galifreyan inscription. The top is remodelled and split in 3 separate parts, bottom, roof and lamp. The bottom is inverted and mounted to the roof with 4 small screws (you can add a drop of glue on corners), the lamp is glued to the top. The final height of the model is 285 mm.
Print settings I used: - 0.2 layer height - 2 perimeters (with "alternate extra wall" option in Orcaslicer) - 10% infill (I use gyroid) - no supports
Note: the model requires approx 500g of filament and 25+ hrs to complete with settings specified above, using default print speed in Orcaslicer's Creality Ender 3 V3 SE printer profile. Print as oriented.
Happy printing and coin saving.