Makita 18V Battery Honeycomb Storage Wall Holder with M3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attaches your Makita battery to your Honeycomb Storage Wall with M3 screws.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This removes part of the top, the part that catches the latching mechanism of the battery to hold it in place, which removes one overhang. I found you don't need it, the battery is heavy enough not to jump up 10 cm by itself.
I also replaced the hexagonal wall inserts with M3 screw holes, to remove another overhang. This makes it easier to remove the model, in case you think it's too shit to have on your HSW without breaking the wall.
I recommend printing it vertically like below

You are going to need two M3 screws, I found 16 mm long screws to be perfect, as well as two M3 nuts and two M3 nut inserts (the other STL file included).