1 / 2
Replacement 35mm film canister / container with lid - PETG and TPU used
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used to have many of these but as they get lost I needed replacements ... and I'm very happy with how this one works.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 106
- Wydruki
- 3
- Wyświetlenia
- 285
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (34)Powiązane
Nothing unusual here ... two parts, body in PETG (other hard plastics probably ok too) and lid in TPU-95A. I used 0.4mm nozzle and 0.2mm layers. No infill necessary, no special settings. Very little plastic used: less than 4g for the lid and less than 6g for the body. Let me know how you get on ...