1 / 7
Holder and case for Leatherman ratchet and standard bits — zdjęcie 1
1 / 7

Holder and case for Leatherman ratchet and standard bits

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Compact holder and case for Leatherman ratchet and 9 standard 1/4" bits.

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
134
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

Compact holder and case for Leatherman ratchet and 9 standard 1/4" bits.

The bits and ratchet are held in place by magnets. To make this, you will need 9 magnets measuring 5 x 2 mm and 1 magnet measuring 10 x 1 mm. The magnets should be fixed with superglue.

The bits are very easy to insert, but hold perfectly thanks to the magnets.

There is also a separate case for the holder. This is especially useful if it is stored in a pouch. Then nothing gets caught when taking out the holder.

Tagi