1 / 2
Kadjar Front Door Trimmers connector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Supports for front door trim for Renault Kadjar 8201726303
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a used front door trims for my Kadjar, and it was missing all connectors, just a couple of them were there and were actually broken.
I measured and redesigned, I printed all of them in PETG and they are still going strong.
Just add a good mounting tape above, or some drops of any good (soft) glue. You need a calibrated printer for this, print one of them, try it on the trimmer and it should fit without too much pressure, and not fall off easily.
Someone should try to print this at 101% maybe.