Textured Knurled Flower Pot - Modern Cactus & Succulent Decor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modern planter with knurled texture. Fits standard 10cm nursery pots. Two heights (8cm & 10cm). No supports needed.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
This is a modern 3D printed planter featuring a detailed knurled diamond pattern. The texture gives the pot a premium, tactile feel and does an excellent job of hiding 3D printed layer lines, making it look like a manufactured ceramic piece.
I designed this specifically for smaller houseplants, cacti, and succulents. It is sized to perfectly hold standard 10cm (4 inch) nursery pots, so you can drop your plant in without repotting if you prefer.
Two Versions Included Both versions fit a 10cm diameter internal pot, but offer different aesthetic heights:
Standard Height: 8cm tall. Great for smaller cacti or succulents where you want the plant to be the focus.
Tall Height: 10cm tall. Offers a sleeker, more cylindrical look that hides the rim of the nursery pot completely.
Features
Modern Aesthetic: The geometric knurling fits well with modern, industrial, or minimalist office decor.
Standard Fit: Designed around common 10cm nursery pots.
Sturdy Base: Thick walls ensure the pot is stable and won't tip over easily.
Print Settings
Material: Matte PLA looks incredible with this texture (hides lines even better), or PETG/ASA if you plan to use it outdoors.
Walls/Perimeters: 3 to 4 walls are recommended to ensure the pot is watertight if you plan to plant directly into it.
Infill: 10-15% (Gyroid).
Layer Height: 0.20mm works great; the texture is forgiving.
Supports: None required. The knurled angle is designed to be self-supporting.
Watertightness Note If you are planting directly into the pot (adding soil), I recommend increasing your Wall Count to 4 and slightly increasing your flow rate/extrusion multiplier to ensure a watertight seal. Alternatively, simply keep the plant in its plastic nursery pot and use this as a decorative cover (cachepot).
Happy Planting!