Empire LRP coin counting trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coin counting trays for the in-game coinage for Profound Decisions' live roleplaying game Empire
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Coin trays sized for the coins for Profound Decisions' Empire LRP.
If you want to count a bunch of small change, these trays should allow you to simply make a stack of the same coins, then drop the entire stack into the tray. You'll then be able to read off how much you have from the coin tray.
The font used is "Albertus MT". The text is embedded in the STL files, but if you want to generate your own STLs from the OpenSCAD file, you'll need to either get a copy of that font yourself, or substitute it for something else you already have. If you're substituting the font, consider also adjusting the spacing around the text in the OpenSCAD file.
I recommend printing in the finest detail you can to get the best resolution for the text. I'm printing on a Prusa XL 5T with input shaping and a 0.4mm nozzle, slicing using the PrusaSlicer default 0.10mm "Fast Detail" print settings, modified to have 15% lightning infill and with ironing enabled. I've had good results using these settings with Prusament PLA, Prusament PETG, and Prusament Woodfill.
By popular request, these trays will also be available to buy at Empire events from the Game Operations Desk (GOD) once it's open for general service, typically from 17:00 on the Friday of each event, printed in Prusament Woodfill. They'll probably be £2 each, so £10 for the full set; that's not priced to make a profit, but if there is any profit there it'll go to PD.
You're very welcome to print these for your own use, either as-is or with your own modifications. If you share your files, you need to either share them with the same license I'm using (CC-BY-NC-SA) or agree something else with me. You're also welcome to print the models yourself, either for your own use or for others, provided you don't charge people more than it costs you to make them. If you want to sell in-character, however, you're welcome to charge as much or as little IC money as you'd like!
I'm one of the heads of department for GOD, and I originally designed these just for use within GOD; I hadn't expected there to be so much interest in them! Since some people were keen, you can give me money through Ko-fi. This comes with absolutely no benefits other than my gratitude.