1 / 3
Creality K1 Series (SE) Honeycomb Alien Door Handle — zdjęcie 1
1 / 3

Creality K1 Series (SE) Honeycomb Alien Door Handle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Will fit any K1 Series printer with 20mm spaced holes

Ocena
0 / 5
Polubienia
3
Pobrania
25
Wydruki
0
Wyświetlenia
106
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I could not find a good looking honeycomb handle for my K1 SE so I figured why not try to design one. There are two designs, one with and one without through holes. Through holes are for if you want to use a 21mm long M3 bolt to attach to the door. I think that gives it more of an industrial look. Or there is the clean version you would use your factory M3 screws for and self tap as you assemble. 

I would suggest supports if printed on the back side where the holes are. If your printer is good at bridges then none needed for face down printing for that bed texture on the honeycomb. Alien and honeycombs are the same extruded size so no support under wither is needed. 

3 model options. No edge with holes, without thru holes and with edges no thru holes.

Yes. Aliens!

I will upload photos of my print later today or tomorrow. 

Tagi