1 / 6
Die Grinder Precision Wedge Lift Mechanism - 20mm Travel — zdjęcie 1
1 / 6

Die Grinder Precision Wedge Lift Mechanism - 20mm Travel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Precision vertical self-locking lifting mechanism (20mm) using a horizontal wedge and screw principle.

Ocena
0 / 5
Polubienia
6
Pobrania
27
Wydruki
0
Wyświetlenia
198
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial
The Concept:

Precision vertical lifting mechanism (20mm) using a horizontal wedge and screw allowing managing different heights of parts or wear of the grinding wheel. It is used for precise grinding of round object faces. But there is much more potencial.

It features a 90° rotating die grinder clamp that has a horizontal stop. Thanks to screw drive, the position is held automatically under loads up to several kilograms.

Integrated dovetail slides are for maximum stability and zero wobble.

It is designed to hold a conical die grinder with diameters 27mm and 34 mm spaced 65 mm apart. But you can easily modify the insert or the whole clamp to suite your needs.

On the opposite end there is a CONSOLE so you can hold and manually rotate anything you want. A semi-circular ring paired with a V-grooved top on the TABLE is advantageous because it creates a self-aligning interface that ensures precise centering and high contact stability through two-line contact, even if there are slight misalignments or wear.

The BASE has four 6,4mm holes ready to be mounted to something more sturdy.

Included are STEP files so you can modify it or print your own attachements.

Printing:

Materials :

Specific combination of PETG-CF for frame and wedge (for rigidity, self lubrication and wear resistance)  and ASA for piston. Mainly because identical materials should not be paired together because of cold welding. The rest can be printed in normal PETG. I generally do not use PLA for anything functional.

On the picture below it is coloured for optimal performance. Black - PETG CF, blue - ASA, green - PETG

 The geometry is optimized for easy printing so no supports are needed.

To make it as rigid as possible at least 5 perimeters are adviced. Use 0,2 mm layer height with optional variable layer height for console because of the semi circular feature on top.

Hardware:

DIN912 M8X45 - 1X (socket head bolt)

DIN912 - M6X25 - 4X (socket head bolt)

DIN912 M6X22 - 1X (socket head bolt)

DINENISO7091-8 - 2X (washer)

DIN934 M8 - 1X (regular nut)

DIN934 M6 - 1X (regular nut)

DIN933 M8X100 - 1X (hex bolt)

DIN982 M8 - 2X (self-locking nylon nut)

Assembly:

All sliding surfaces need to be sanded with 220 or 320 grit sandpaper and lubricated with grease suitable for plastics prior to assembly.

  • Insert the PISTON into the BASE and slide it to the lowest possible position.

  • Insert the NUT (DIN934 M8) into the WEDGE, then slide the wedge into the dovetail groove of the BASE.

  • Connect the WEDGE to the PISTON via the dovetail groove and slide it to the pistons highest position.

  • Put NUT (DIN982 M8) into the pocket in the base and hold with a wrench. Manually screw the SCREW AND HANDLE assembly into the WEDGE AND NUT assembly. (Note: Simply pierce the sacrificial/support layer in the wedge hole using the screw).

  • Hold the NUT (DIN982 M8) and tighten the SCREW AND HANDLE until there is a minimal gap, ensuring there is still free movement between the HANDLE and the BASE.

  • Install the CONSOLE.

Tagi