Travel Connect 4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small version of the popular "Connect 4* game, with auto sorting
- Ocena
- 4 / 5
- Polubienia
- 42
- Pobrania
- 129
- Wydruki
- 2
- Wyświetlenia
- 590
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🧩 Travel Games Series
This model is a new addition to my Travel Games Series.
All games in this series share the same compact format, making them easy to stack, store, and carry. They’re small enough to slip into a backpack and sturdy enough to enjoy on the go.
Thanks to the clever design, you can play these games comfortably in a car, on a train, or even on a plane—and best of all:
no batteries, no charging, no screens. Just play. 😉
🧩 Design & Background
There are many Connect 4 designs available online and on Printables—some even featuring ingenious sorting mechanisms.
This version adapts the classic game to my travel-friendly format and adds a simple auto-sorting feature.
Well… auto-sorting, as long as you insert the game pieces correctly 😉
Each game piece is marked with “Me” on one side.
When inserting a piece, make sure:
The piece slides freely into its slot
The “Me” side faces you
After the game, simply lift the frame carefully. The pieces will fall down and automatically sort themselves into the correct compartments.
🎯 Object of the Game
Connect 4 is a classic two-player strategy game. The goal is simple:
be the first player to connect four of your pieces in a row—horizontally, vertically, or diagonally.
Players take turns dropping their pieces into the grid, trying to outsmart and block their opponent.
Quick to learn, fun to master, and perfect for players of all ages.
Official rules can be found here:
👉 https://officialgamerules.org/game-rules/connect-4/
🛠 Printing Notes & Instructions
Bottom:
Print with 0.2 mm layer height
Hinge:
Use a short piece of filament
You may need to gently ream the holes with a 1.8 mm drill
Lid:
Print with 0.2 mm layer height
Smooth the hinge parts lightly when necessaryLatch:
Print with 0.15 mm layer height
Glue the latch to the lid—otherwise it may loosen over time
Frame:
Print with 0.15 mm layer height and 100% infill
Game Pieces:
Print with 0.15 mm layer height and 100% infill
Print two full sets in different colors
❤ One Last Thing…
If you like this design, give it a heart
If you print it, share some photos
If you have questions, just ask
Have fun—and enjoy playing wherever your travels take you! 🎒🎲