filament runout sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
it requires only a microswitch, 2 m3x12 scews, 2 t nuts and a 4mm sphere or a 4mm teflon tube
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
it requires only a microswitch, and a 4mm sphere (untested but possible in theory) or a 5,5mm slice of 4mm teflon tube, 2 m3x12 scews & 2 t-nuts to be mounted to a 2020 0r 2040 extrusion.
Where the filament comes out it has 2 spikes that can keep a bowden firm. there is a jig for cutting the tube.
added also
-version without spikes
-version with collets (design still needs to be validated)
v2- bolt holes added to mount stand-alone (e.g. along a bowden tube), ironing top surface+ glue maybe recommended
please remember to like, leave a review or a make, and let me know if anything could be improved or if you need a special mod, if you particularly appreciated my work: https://ko-fi.com/niccolobagnaroli