1 / 1
Flex ATX Blanking Plate for UENORTH UE-S6
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Blanking plate for the UENORTH UE-S6 PSU mounting point.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Designed for the UENORTH UE-S6 to fill the gap when using a build with no PSU.
Flex ATX size with a mildly unique hole pattern.
Hole sizes are a bit too small when using PLA.
I used the screws to tap the holes and this worked for me, but potentially resize for your own use.
Could do with slightly widening as the measurements are exact so mild misplacement will cause a small gap, but not enough for me to care.