Unistrum bodies and headstocks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the Unistrum bodies and headstocks i've made so far. It also includes the pins and other pieces and a tool.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recommend printing the bodies on a accurately calibrated printer for best fitment. I print the bodies at .2 layer height with 3 walls but 2 walls works
5 top and bottom layers
5% gyroid infill with 4 layers at 15% gyroid infill with a custom layer range
so 5% gyroid the last 4 top layers before the top solid face are at 15%
make sure you print the connecting pins and button strap pins at 2 walls or else it becomes very hard to join together.
all parts fit on a bambulab p1s printbed of 256x256mm
also make sure to flip the bodies so the face prints up
the headstocks print upside down so the bed texture is the face of the headstock.
I use a drop of super glue to hold the headstock pin in the headstock. make sure the hole is on the outside.
there is also a pin setting tool makes it easier to insert pins.