1 / 1
Eureka AS1000 Vacuum canister repair part
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repair part for Eureka AS1000 vacuum canister
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My vacuum broke, so I made a part to fix it. My wife still isn't impressed.
You'll want to trim off the original material around the clip, leaving the top section.
I also drilled a hole through the section at the hole in the print as well as the lower standoff that breaks, causing the upper posts to break. Hardware needed: 1 - M3x8, 1 - M3x20
Print with 100% infill and basic supports. Print as oriented for minimal support material.