1 / 4
Wall hanger / clamp for Milwaukee QUIK-LOK (FOPH) tool and attachements — zdjęcie 1
1 / 4

Wall hanger / clamp for Milwaukee QUIK-LOK (FOPH) tool and attachements

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple but strong wall hanger / clamp for Milwaukee QUIK-LOK attachments, or other equipment with a 1" diameter shaft.

Ocena
5 / 5
Polubienia
9
Pobrania
124
Wydruki
2
Wyświetlenia
405
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Inspired by Adam Knepper's design, I have designed this from scratch. All sizes in mm, except for the clamp which is ~1".

Added  diagonal supports making this version significantly stronger. Also reduced the diameter of the clamp slightly such that it snaps slightly to the shaft of the Quik Lok tool or attachments. Just a little, such that the shaft will still slide through the clip, but is not too loose. Pan head screws to be used. By design I  avoided counter sink holes, as flat head screws can split the 3D printed parts.

Due to the added diagonal support, I can now safely hang the main tool body from a single clip. The Hedge Trimmer attachment requires two of these wall clips, as the center of gravity of that attachment is not in the center of the shaft. 

Tagi