1/4"-20 Tri-Wing Knob / Thumbscrew
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a knob that accepts a 1/4"-20 nut or bolt. I downloaded this from Thingiverse years ago, and wanted to share…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 498
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a knob that accepts a 1/4"-20 nut or bolt. I downloaded this from Thingiverse years ago, and wanted to share it with a friend, but could no longer find it here. I am not sure if it was deleted, or if it's just lost to the rather poor search algorithm this site uses.
If anyone finds the original posting, please leave a link to it in the comments so I can add attribution, and mark this as a remix.
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Rafts:
No
Supports:
No
Resolution:
0.15mm
Infill:
30%
Filament: Polymaker PLA Post-Printing =============
I add a dab of STARBOND flexible CA glue to the walls of the hexagonal hole before pressing in the 1/4"-20 nut or bolt. This helps secure the nut or bolt to the knob.
Category: Parts