Tape Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a quick and dirty tape hanger. This features a 2.25-inches long shelf to hold 2" large tape rolls.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 225
- Wydruki
- 7
- Wyświetlenia
- 712
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Just a quick and dirty tape holder. This features a 2.25-inches long shelf to hold even large tape rolls. The body is 0.25-inches thick for added stability and features a gusset on the bottom for even more rigidity.
It also features two 0.125-inch (1/8") mounting holes. This will fit the largest duct tape rolls down to small electrical tape rolls. I have included the Fusion 360 design file for ease of modification. If you remix, please mark it as such, and if you make this, please post your make and leave a comment!
I have tested with the following tape rolls:
- The Original 2" Duck Tape - https://amzn.to/3wVlsgE
- Scotch Blue Painter's Tape - https://amzn.to/3NEkF9X
- 3M Scotch #35 Multi-Color Electrical Tape - https://amzn.to/3wW4IG5
- APT 2 Mil PET Tape with Silicone Adhesive - https://amzn.to/3wZVybE
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Design File Included: .stl .f3d, .ipt, step, .skp and obj files.
Follow The Makers Workbench on:
I have only tested this model using the default 0.35mm Fast preset in Prusa Slic3r 2.2.0 with the following amendments made.
- 4-perimeters
- 4-top layers
- 4-bottom layers
- 20% infill
- Cubic Infill pattern
- Monotonic Top and Bottom Pattern
PLA Used: Polymaker Polylite PLA - https://amzn.to/3mTrbuU