1 / 9
Textured Bowl Planter - 12cm x 8.5cm — zdjęcie 1
1 / 9

Textured Bowl Planter - 12cm x 8.5cm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Decorative bowl-shaped planter with lined texture. 12cm opening, 8.5cm high. Perfect for succulents or trailing plants.

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
27
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a decorative, bowl-shaped planter featuring a clean lined texture that wraps around the exterior. The rounded profile softens the look of any shelf or desk, while the linear pattern adds depth and shadow.

With a wide 12cm opening and a height of 8.5cm, this bowl is perfect for shallow-root plants like succulents, bonsai starters, or lush trailing plants like Pothos or String of Pearls.

Features

  • Bowl Geometry: The wider, shallower shape provides excellent surface area for arranging multiple small succulents or a single statement plant.

  • Lined Texture: The vertical lines (ribbing) create a sophisticated light-and-shadow effect that hides layer lines perfectly.

  • Sturdy & Stable: The lower center of gravity makes it very stable on desks or windowsills.

Print Settings

  • Material: PLA, PLA+, or PETG. Matte filament looks particularly good with this lined texture.

  • Walls/Perimeters: 3 to 4 walls are recommended. This creates a solid, watertight barrier if you are planting directly into the bowl.

  • Infill: 10-15% (Gyroid).

  • Layer Height: 0.16mm or 0.20mm. The finer the layers, the smoother the curves of the bowl will look.

  • Supports: None required. The curve of the bowl is designed to be self-supporting on most printers.

Usage Note This creates a beautiful centerpiece. If you plan to use real soil and water, ensure you print with enough bottom layers (4-5) and walls (3-4) to make it watertight.

Happy Planting!

Tagi