Printer Test Suite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This suite of objects should not be used anymore to test out your printer. I curated this suite back in 2012.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 139
- Wydruki
- 1
- Wyświetlenia
- 856
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
I curated this suite back in 2012 as a method to test print quality on several different Mendel Max printers that were new to the 3D Printing world, but since then printers have evolved (when I uploaded this, it was normal to print at .3 or .4 layer height.), their tolerances were not that great, and as such, there are much better printer benchmarking files out there now. However, you may find these objects useful in your testing and calibration. Leave a comment if you did find this test suite useful.
This is the suite of objects used in my 3D Printer testing regime. I have selected these items as I feel they cover the full range of necessary tests to properly and accurately judge the quality of a filament-based 3D Printer.
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Follow The Makers Workbench on:
PLA Used: Polymaker Polylite PLA - https://amzn.to/3mTrbuU