24 slot USB Thumb Drive Organizer with TweakTown.com logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I worked for TweakTown.com and was requested to design a 24x Thumbdrive organizer for one of the reviewers. Here it is!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 504
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I worked for TweakTown.com previously and was requested to design a 24x Thumb drive organizer for one of the reviewers. Here it is! I have a second version of this holder that has been updated and does not include the logo. You can find it here.
I have tested this model with the following thumb drives, but it will work with any standard USB thumbdrive:
- SanDisk 128GB Ultra Flair USB 3.0 Flash Drive - https://amzn.to/3tTSmfL
- SanDisk 16GB Cruzer USB 2.0 Flash Drive - https://amzn.to/3LwRCmL
- Samsung BAR Plus 32GB Flashdrive - https://amzn.to/372YtW7
- Micro Center SuperSpeed USB 3.0 Flash Drive - https://amzn.to/3qUotdo
- PNY 128GB Turbo Attache 3 USB 3.0 Flash Drive - https://amzn.to/3K6KqO8
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Follow The Makers Workbench on:
I have only tested this model using the default 0.35mm Fast preset in Prusa Slic3r 2.2.0 with the following amendments made.
- 3-perimeters
- 3-top layers
- 3-bottom layers
- 20% infill
- Cubic Infill pattern
- Monotonic Top and Bottom Pattern
PLA Used: Polymaker Polylite PLA - https://amzn.to/3mTrbuU