1 / 2
Parkside PFBS 12 C7 cordless rotary tool cutting disk protector — zdjęcie 1
1 / 2

Parkside PFBS 12 C7 cordless rotary tool cutting disk protector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple attachment to protect cutting disk on Parkside PFBS 12 C7 cordless rotary tool from damaging

Ocena
0 / 5
Polubienia
2
Pobrania
30
Wydruki
0
Wyświetlenia
226
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
GNU General Public License v2.0

This is my first 3D model, and I am not a CAD professional nor an engineer, just a 3D printing enthusiast.

This model was drawn and designed in SketchUp.

The main idea behind this model is to make a protector for the cutting disk on the Parkside PFBS 12 C7 cordless rotary tool.

The Parkside PFBS 12 C7 is a cheap but reasonably good tool (Dremel-like), sold by Lidl and Kaufland supermarkets in Europe.

The original box is too small to fit the PFBS 12 C7 when the cutting disk attachment is mounted (which is used 99% of the time), and it is too tiresome to mount and dismount the cutting disk attachment every time you need it, so you just leave it on the tool and place it in your toolbox. However, if you’re not extra careful, you can easily break the fragile cutting disk when it bumps into something.

This attachment protects the cutting disk from breaking while it’s mounted on the PFBS 12 C7, so you can drop it into your toolbox without worrying.

The protector is designed to simply clip onto the big black plastic nut on the PFBS 12 C7, but you must be very careful when mounting it, and extra careful when removing it (I even put a label "Caution, careful !" on mine). It should be removed with both hands, making sure it slides off evenly, because if you tilt it too much, it can break the disk.

The model can be printed in any orientation: vertical (needs supports) or, even better, horizontal (a flat surface on the back side was designed for this). Of course, a finer print results in a better looking model and better snapping/attaching.

If you find it useful, please leave a comment.