6x 23A 12V Battery Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case holds six 12V size 23A batteries.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 466
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This case will fit six 12V size 23A batteries.
23A is interchangeable with the following batteries and should fit fine: MN21 / MS21 / V23GA / L1028
I have tested this case with the following brands of 23A batteries:
- Amazon Basics 23A Alkaline Battery - https://amzn.to/3qS0MSQ
- LiCB A23 23A 12V Alkaline Battery - https://amzn.to/3IWqYBZ
- Duracell 21/23 12V Alkaline Battery - https://amzn.to/3qST5My
- Energizer A23 Alkaline Battery - https://amzn.to/3tXnY4c
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Follow The Makers Workbench on:
I have only tested this model using the default 0.35mm Fast preset in Prusa Slic3r 2.2.0 with the following amendments made.
- 3-perimeters
- 3-top layers
- 3-bottom layers
- 20% infill
- Cubic Infill pattern
- Monotonic Top and Bottom Pattern
PLA Used: Polymaker Polylite PLA - https://amzn.to/3mTrbuU