6x AAA Battery Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 6 rechargeable AAA Batteries.
- Ocena
- 4,4 / 5
- Polubienia
- 32
- Pobrania
- 281
- Wydruki
- 6
- Wyświetlenia
- 1141
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Holds 6 rechargeable AAA Batteries. Place batteries nub up for “Charged” indication, and nub down for “Depleted” indication.
I have tested it with the following AAA Battery Brands:
- Amazon Basics AAA High-Capacity - https://amzn.to/3NCBMJf
- EBL Rechargeable AAA Batteries - https://amzn.to/3DrbKUu
- Panasonic Eneloop BK-4MCCA8BA AAA Batteries - https://amzn.to/35vODf6
- Energizer Rechargeable AAA Batteries - https://amzn.to/3tW3U2f
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Follow The Makers Workbench on:
I have only tested this model using the default 0.35mm Fast preset in Prusa Slic3r 2.2.0 with the following amendments made.
- 3-perimeters
- 3-top layers
- 3-bottom layers
- 20% infill
- Cubic Infill pattern
- Monotonic Top and Bottom Pattern
Print time on a stock Prusa i3 MK2s is about 2-hours 32-minutes and uses an estimated 61.81-grams of PLA filament.
PLA Used: Polymaker Polylite PLA - https://amzn.to/3mTrbuU