1 / 5
Crown of Pencils. Works With Most Colored Pencil Brands — zdjęcie 1
1 / 5

Crown of Pencils. Works With Most Colored Pencil Brands

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,75 € – 2,14 € netto (bez VAT)

Dla pliku: crown-of-pencils_0.35mm_PLA_MK2S_1h38m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,95 € netto (środek widełek).

Masa podana przez autora
31 g
Czas druku podany przez autora
1,63 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This is one of my most popular designs and was originally printed in 2011 on my McWire RepStrap.

Ocena
5 / 5
Polubienia
31
Pobrania
157
Wydruki
4
Wyświetlenia
764
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

This is one of my most popular designs and was originally printed in 2011 on my McWire RepStrap. It has since been downloaded from various .stl repositories over 100,000 times. If you print this model, please share your make, and leave a comment! 

Holes in the base fit 3.3mm diameter, round-shaft colored pencils. 

I have tested the Crown of Pencils with the following colored pencil brands: 

*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.

Follow The Makers Workbench on:

I have only tested this model using the default 0.35mm Fast preset in Prusa Slic3r 2.2.0 with the following amendments made.

  • 3-perimeters
  • 3-top layers
  • 3-bottom layers
  • 20% infill
  • Cubic Infill pattern
  • Monotonic Top and Bottom Pattern

PLA Used: Polymaker Polylite PLA - https://amzn.to/3mTrbuU 

Tagi