Xiaomi Thermometer Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sleek, support-free stand for Xiaomi Mi Monitor 2. Minimalist design with sensor cutout for 100% accurate readings.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Xiaomi Mi Temperature and Humidity Monitor 2 Stand
Elevate your smart home setup with this clean, functional desk stand. This design transforms the small Xiaomi sensor into a stylish desktop or shelf accessory, improving visibility while maintaining a tiny footprint.
Key Features:
Support-Free Printing: Optimized geometry allows you to print this without any support structures.
Sensor Cutout: Features a dedicated opening at the back to ensure the temperature and humidity sensors remain unobstructed for 100% accurate data.
Snug Fit: The monitor slides in perfectly, staying secure while remaining easy to remove for battery changes.
Minimalist Aesthetic: Subtle curves and a slim profile that blend seamlessly with any modern desk or shelf.
Print Instructions:
Orientation: Print on its side (as shown in the slicer preview) for the best surface finish and strength.
Material: PLA, PETG, or ABS/ASA.
Layer Height: 0.2mm works great, but use 0.08mm for perfect quality and smooth gradients
Infill: 15% is plenty.
Supports: None.
