Hueforge Cyan The Great Wave off Kanagawa
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A series of hueforges, inspired by the great ukiyo-e artist Katsushika Hokusai.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello everyone,
this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice.
Printing:
rint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x105.82mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#0a5780 PLA BambuLab Basic Cyian Transmission Distance: 3.5
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ffffff PLA Alzament White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Basic Cyian
At layer #13 (1.12mm) swap to Blue Gray
At layer #19 (1.6mm) swap to White for the rest.
Happy printing!
