The Crucible: Backpack Quadcopter Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This design adds the ability to carry multiple quads safely on the front of most camera backpacks which have light stand mounts on the front. Use any 15x200mm and 15x250mm lipo straps to fasten the mount to backpack and to attach drones to it. Why "The Crucible"? Ask DOOM Guy:)
V2.0 uses printed hooks to hook into a bottom strap on a bag. V3.0 requires an extra battery strap at the bottom, which allows for more compatibility.
I printed these in PETG 0.4mm nozzle 0.2mm layer, fully walled for maximum strength and UV resistance since flying in the sunshine is great and heavier quads like 7-10 inches can also be mounted this way. Feel free to experiment with settings and filament to your liking.
Also available: a design for attaching a tablet to the top of the mount. Tablet needs to have a case with a kickstand inorder for this to work. Requires 2x 15x200mm battery strap.
Also PETG 0.4mm nozzle, 0.2mm layer height, 6 Walls, 7 botttom- and top shell layers, 20% gyroid infill.