New Nintendo 3DS Stylus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Need a replacement stylus for the New Nintendo 3DS, well this one has you covered.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 755
- Wydruki
- 1
- Wyświetlenia
- 2598
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy
etsy -
http://www.16bitgamestore.etsy.com/
eBay -
https://www.ebay.ca/usr/16bitvideogamestore
I've had issues printing this in Prusa Slicer, Maker Bot's Cura is the only reliable way I've been able to print these.
Bed Temp 50C
Raft
0.1mm layer hight
100% infill
Raft with supports
Printing these stylus requires a bit of post processing and some additional work. You'll need to print this on the curve from it's end so that the lip prints right and it makes it easier to remove. The support needs to just be on the shaft.
After the part finishes printing you'll need to remove the support materials and shave off any excess.