Small marking gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For my small ruler I wanted to have a small marking gauge, same as I copied and printed 2 years ago for a bigger ruler.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
_v3
- Strange things happen: last week I ordered the third ruler, and what shall I say, in fact the new one has the specified measurement of 13mm width.
Improved Version _v2:
- The boreholes have shifted further inwards.
- No melting inserts required anymore, M3 nuts are recessed into slots on the side, see picture
_v1
Just like I had a marking gauge for my larger 30mm ruler, I also wanted one for my smaller 13mm ruler. A quick CAD session with my favourite CAD system OnShape, resulted in a realy neat and handy gadget.
Top and bottom are hold together with 4 M3x16 screws and 4 melting inserts. The stopper is made with a M5 screw and a copied star grip from here: https://www.printables.com/model/1518856-star-grip-hexagon-screw-m3-m4-m5-m6-m8-m10-m12/files (thanks a lot Alex). The nut is recessed into a slot in the lid, so it holds better than a melted insert.
As of now I use a 3D printed bolt, because this one makes no marks on the ruler :)
The ruler is a Helios Preisser Stahlmaßstab, 150 x 13 x 0.5 mm (actually the ruler is only 12.3mm wide).