1 / 4
Konica/Konishiroku Pearl II & III Carrying Case — zdjęcie 1
1 / 4

Konica/Konishiroku Pearl II & III Carrying Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lost the leather half case for your Pearl folding camera? This 3D printed case adds strap lugs and some protection

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

I designed this case as an alternative to the leather half case these cameras came with. It screws into the tripod mount with these screws, or something similar.

The screw mount is designed to print without support, so you'll have to cut through the bottom layer where the screw hole is before installing it. After that, I just use superglue to attach it to the main case. 

It takes a lot of force to get the screw started and through, but you only have to do it once as it's designed to be a captive screw. 

The main case should be good without support too. I recommend PETG and solid infill, since layer adhesion is the only thing holding the camera up. 

Let me know if you have any issues with the files. Good luck!

Tagi